Standard Breakout Module

20180205_145423.jpg
20180205_145507.jpg
20180205_145527.jpg
20180205_145423.jpg
20180205_145507.jpg
20180205_145527.jpg

Standard Breakout Module

from 1,175.00

This I/O Breakout Module is compatible with all HuMoTech end-effectors.

Modules must be calibrated using a designated load cell, and can be calibrated by HuMoTech or by the customer.

    Calibration:
    Quantity:
    Add To Cart

    System Dimensions

    • Width 1.3"
    • Depth 4.33"
    • Height 4.72"

    System Contents

    • 1x I/O Module
    • 1x .2m Shielded M12 Cable
    • 1x .2m Shielded DB9 Cable

    Installation

    • Mount the module to the DIN rail next to one of the end-effector inputs using the spring loaded DIN rail attachment
    • Plug the M12 cable into the selected end-effector input and connect the DB9 Quadrature input to one of the DB9 Quadrature inputs on the IO Unit
    • Connection is made to the end-effector via a DB15 cable (not included).

    Connectors: 

    • Load/Power Connector (M12-5 A-Coded Female)
    • Quadrature DB9 Female
    • DB15 Female

    More details are available on the IOB00401A page on the Help Center.